|
Continental Aluminum Flagpole Info
As the
standard of the industry, Anchor's
Continental external halyard
flagpoles offer a wide range of
exposed heights and shaft strength,
and finishes. Exposed heights range
from 20' to 80'. Multiple piece
shaft sets are pre-fitted at the
factory and use a self-aligning
internal sleeve.
All Continental shafts are
made from seamless 6063-T6 high
strength aluminum and are designed
to meet the most exacting
architectural standards.
Standard fittings for the
Anchor's Continental line include a
revolving cast aluminum single
halyard truck; a limited stretch
braided nylon halyard; bronze snap
hooks; 9" cast aluminum cleat; heavy
gauge (.060) spun aluminum flash
collar and a HD BAL series gold
anodized, aluminum finial ball.
Flagpoles with
a 10" or 12" butt diameter are
fitted with a heavy duty, sealed
bearing revolving truck on a heavy
duty stainless steel spindle and
stainless steel snap hooks.
The ground set
foundation sleeve is made of
hot-dipped galvanized corrugated
steel with self-centering wedges and
an integrated grounding rod.
The standard
shaft finish is a deep luster
polished finish. Other architectural
finishes are available to include,
clear anodized, dark bronze or
black.
Need a freight quote, Click Here>
aak@aflagpole.com
Please include, pole size, zip code
that pole is to be shipped to state
residential or commercial delivery
site. Or simply complete you order
and we will notify you of exact
freight cost prior to charging your
card.
Our cone tapered ground set aluminum
flagpoles are precision fabricated
from new, 6063-T6 tubing utilizing
the industry's most sophisticated,
state-of-the-art manufacturing
processes. The conical portion
tapers approximately 1" in every
5.55 feet. Poles with overall
lengths of less than 35' are shipped
in one piece when possible. Longer
lengths are shipped in sections and
will be factory fitted with a
self-aligning sleeve which requires
no field welding. Upon proper
assembly a hairline joint is all
that is visible.
On Flagpoles under 50 ft tall
add our dual sealed bearing for a
lifetime of continued use. Tip:
Remember to change your flagpole
line when it shows signs of ware,
it only cost a few dollars and is
easy to do before it breaks. Once
the line breaks you will need to get
to the top of pole. With our dual
sealed bearing truck the only
maintenance required on external
halyard flagpoles is to change the
line when necessary and of course
replace flags as required.
All poles are double wrapped with
protective paper and shipped in a
hard fiber tube. Remember to remove
flagpole from tube on arrival if
storing flagpole outside. The
wrapping and tube if allowed to
become wet or damp can stain the
flagpole, and it is difficult to
remove.
|
ONE YEAR LIMITED
WARRANTY
Flagpole Components,
Inc. ( FCI ) warrants to
the first purchaser of
its products (Buyer)
that its products will
be free from defects in
material and workmanship
under normal use and
service for a period of
one year from the date
of shipment by FCI. If
any failure to conform
to this warranty appears
and written notice of
such failure is given to
FCI within the warranty
period, FCI shall, at
its sole discretion,
repair or replace the
defective product.
Specifically excluded
from this warranty is
the cost of labor
required to replace or
reinstall the defective
product. Repair or
replacement by FCI is
the Buyer's sole remedy
in the event of a
failure of the products
to conform to this
warranty. This warranty
does not cover defects
caused by improper
installation,
overloading, accident,
misuse or neglect nor
does it cover alteration
or modification unless
the change has been
approved, in writing, by
FCI. |
|
ADVERTISING
TALL FLAGS