page will allow you to choose by; flagpole height,
price, butt diameter, wind rating or wall thickness.
Hold mouse over part number and click for full
details about that flagpole. (wall thickness See Notes
First two numbers of
part number are Height of pole
This is all
helpful information that will allow you to choose a
flagpole that fits your size requirements and works
in your wind zone.
Please see our
if you do not know your wind zone.
Commercial Flagpoles - Part number starts
Residential Flagpoles - Part number
starts with "E"
Sentry Flagpoles (internal halyard using a
rope system) Part number starts with "S"
Independence Flagpoles (using a stainless
steel winch and cable system) Part
number starts with "I"
Flagpoles are listed "H"
(for elevated wind areas like
southern and eastern Florida)
How Do I Choose? <
This link explains the differences between Kits,
Residential & Commercial Flagpoles
Most all of our "C" series
flagpoles are available in our Sentry or
Independence line of secure internal halyard
thickness; .125 - .156 - .188 -
.250 - .375 the bigger the number the
stronger the flagpole. Same applies to
They range from 3" thru 12" the
larger the diameter the stronger the flagpole. So
using a combination for wall thickness, and larger
diameters you can achieve wind ratings that meet
almost any area.
Info Notes Below
part number can tell you
Dimensions For Commercial Ground Set Flagpoles